Optimization and regularization of complex task decomposition for blind removal of multi-factor degradation

Most existing image restoration methods based on deep neural networks are developed for images which only degraded by a single degradation mode and imaging under an ideal condition. They cannot be directly used to restore the images degraded by multi-factor coupling. A complex task decomposition regularization optimization strategy (TDROS) is proposed to solve the problem. The restoration of images degraded by multi-factor coupling is a complex task that can be solved by separating these multiple factors, that is, breaking the complex task into numbers of simpler tasks to make the entire complex problem be overcome more easily. Motivated by this idea, the TDROS decomposes the complex task of image restoration into two sub-task: the potential task constrained by regularization and the main task for reconstructing high-definition images. In TDROS, the front of the neural network is focused on the restoration of images degraded by additive noise, while the other part of the network is focused mainly on the restoration of images degraded by blur. We applied the TDROS to an 11-layer convolutional neural network (CNN) and compared it with initial CNNs from the aspects of restoration accuracy and generalization ability. Based on these results, we used TDROS to design a novel network model for the restoration of atmospheric turbulence-degraded images. The experimental results demonstrate that the proposed TDROS can improve the generalization ability of the existing network more effectively than current popular methods, offering a better solution for the problem of severely degraded image restoration. Moreover, the TDROS concept provides a flexible framework for low-level visual complex tasks and can be easily incorporated into existing CNNs.     

Experimental study on the propagation characteristics of hydrogen/methane/air premixed flames in a narrow channel

This work is focused on the explosion characteristics of premixed gas containing different volume fractions of hydrogen in a narrow channel (1000 mm × 50 mm × 10 mm) under the circumstance of stoichiometric ratio. The ignition positions were set in the closed end and the middle of the pipeline respectively. The results showed that when the gas was ignited at the pipeline closed end, the propagating flame was tulip structure for different premixed gas. When the hydrogen volume fraction was less than 40%, the flame propagation speed increased significantly with the rise of hydrogen volume fraction, and the overpressure peak also appeared obviously in advance. However, when the volume fraction of hydrogen was more than 40%, the increase of flame propagation speed and the overpressure peak occurrence time varied slightly. Furthermore, when the ignition position was placed in the middle of the pipeline, the flame propagation speed propagating to the opening end was much faster than that propagating to the closing end, and there was no tulip shape when the flame propagates to the opening end. The flame propagating to the closed end appeared tulip shape under the influence of airflow, and high-frequency flame oscillation occurred during the propagation. This work shows that the hydrogen volume fraction and ignition position significantly affected the flame structure, flame front speed, and explosion overpressure.     

WSN低功耗低时延路径式协同计算方法

针对云计算应用于无线传感器网络(Wireless Sensor Network,WSN)时延敏感型业务时存在的高传输时延问题,提出了一种WSN低功耗低时延路径式协同计算方法。该方法基于一种云雾网络架构开展研究,该架构利用汇聚节点组成雾计算层;在数据传输过程中基于雾计算层的计算能力分步骤完成任务计算,降低任务处理时延;由于汇聚节点计算能力较弱,时延降低将导致能耗增加,WSN工作寿命减短,为此提出能耗约束下的任务映射策略,并利用离散二进制粒子群优化(Binary Particle Swarm Optimization,BPSO)算法解决能耗约束下的时延优化问题。仿真结果表明,在相同的能耗约束下,对比其他算法,基于BPSO算法得出的映射方案能有效降低业务处理时延,满足时延敏感型业务的需求。     

Effect of wind condition on unintended hydrogen release in a hydrogen refueling station

Ambient condition, especially the wind condition, is an important factor to determine the behavior of hydrogen diffusion during hydrogen release. However, only few studies aim at the quantitative study of the hydrogen diffusion in a wind-exist condition. And very little researches aiming at the variable wind condition have been done. In this paper, the hydrogen diffusion in different wind condition which including the constant wind velocity and the variable wind velocity is investigated numerically. When considering the variable wind velocity, the UDF (user defined function) is compiled. Characteristics of the FGC (flammable gas cloud) and the HMF (hydrogen mass fraction) are analyzed in different wind condition and comparisons are made with the no-wind condition. Results indicate that the constant wind velocity and the variable wind velocity have totally different effect for the determination of hydrogen diffusion. Comparisons between the constant wind velocity and the variable wind velocity indicate that the variable wind velocity may cause a more dangerous situation since there has a larger FGC volume. More importantly, the wind condition has a non-negligible effect when considering the HMF along the radial direction. As the wind velocity increases, the distribution of the HMF along the radial direction is not Gaussian anymore when the distance between the release hole and the observation line exceeds to a critical value. This work can be a supplement of the research on the hydrogen release and diffusion and a valuable reference for the researchers.     

Influence of α′‐/α‐crystal polymorphism on properties of poly(l‐lactic acid)

Poly(l ‐lactic acid) (PLLA) is a biodegradable and biocompatible thermoplastic polyester produced from renewable sources, widely used for biomedical devices, in food packaging and in agriculture. It is a semicrystalline polymer, and as such its properties are strongly affected by the developed semicrystalline morphology. As a function of the crystallization temperature, PLLA can form different crystal modifications, namely α′‐crystals below about 120 °C and α‐crystals at higher temperatures. The α′ modification is therefore of special importance as it may be the preferred polymorph developing at processing‐relevant conditions. It is a metastable modification which typically transforms into the more stable α‐crystals on annealing at elevated temperature. The structure, kinetics of formation and thermodynamics of α′‐ and α‐crystals of PLLA are reviewed in this contribution, together with the effect of α′‐/α‐crystal polymorphism on the properties of PLLA. © 2018 Society of Chemical Industry     

Revisiting the Parallel Strategy for DOACROSS Loops

Journal of Computer Science and Technology - DOACROSS loops are significant parts in many important scientific and engineering applications, which are generally exploited pipeline/wave-front...     

心源性猝死一级预防植入心律转复除颤器前非持续室性心动过速与植入后恰当治疗的关系

目的探讨植入型心律转复除颤器(implantable cardioverter defibrillator,ICD)用于心源性猝死一级预防时,植入前发生非持续性室性心动过速(non-sustained ventricular tachycardia,NSVT)与植入后ICD恰当治疗的关系。方法本研究为单中心回顾性队列研究,连续纳入2006年1月至2017年12月在北京协和医院住院植入ICD用于一级预防的心脏病患者,患者在住院期间ICD植入前均完善Holter检查。根据Holter检查是否出现NSVT,将患者分为NSVT组及无NSVT组。门诊或电话随访至2018年8月,随访事件包括全因死亡、植入后ICD放电治疗及抗心动过速起搏(antitachycardia pacing,ATP)治疗情况。结果纳入60例符合入选和排除标准的患者,随访时间37 (14～61)个月,KaplanMeier生存曲线及Log-Rank检验提示,NSVT组与无NSVT组相比,全因死亡率无统计学差异(P=0. 108),NSVT组恰当治疗的风险高于无NSVT组(P=0. 033),NSVT和左心室射血分数与ICD恰当治疗独立相关(NSVT:HR=5. 099,95%CI:1. 399～18. 588,P=0. 014;左心室射血分数:HR=1. 077,95%CI:1. 013～1. 145,P=0. 018)。结论 ICD一级预防患者植入前出现NSVT提示接受ICD恰当治疗的风险增加。     

基于分支定界法的相控阵雷达事件调度算法

为解决相控阵雷达事件调度问题中调度成功率、时间偏移率与算法时效性三者之间的矛盾，本文提出一种基于分支定界法的调度算法；该算法首先在现有调度结果上调取所有可执行事件，即获得若干"节点"，多步递推后由多"层"节点形成若干条备选"分支"，扩大解空间范围，提高算法性能；然后通过"删减"操作删减掉收益较低分支，将解空间控制在一适当范围内，减小搜索盲目性，降低算法计算量.仿真实验表明，与基于综合优先级算法的调度结果相比，利用本文算法调度时调度成功率提升了52%；与基于时间指针算法的调度结果相比，本身算法时间偏移率降低了61%；与基于遗传算法的调度结果相比，本文算法调度耗时仅为前者1~2%.     

External validity and factor structure of individual and group workload ratings

Work teams experience workload from the group dynamics in addition to the usual sources of individual workload. This study had three objectives: to assess the responsiveness of new rating scales for group workload (GWL), investigate their component structure, and determine if changes in workload occur as the team matures. Participants (360 individuals, 44 groups) engaged in an emergency response (ER) simulation in the form of a board game; team size, game difficulty (one versus two opponents), and time constraints were varied. ER teams rated workload after each of two sessions using the NASA Task Load Index (TLX) and GWL. GWL was most responsive to larger task demands and reflected changes in coordination demand over time. Components reflected mixtures of TLX and GWL scales and suggested that self-organising processes were operating.     

Impact strength elastomer composites based on polystyrene components separated from waste electrical and electronic equipment

The reuse of plastic components of waste electrical and electronic equipment (WEEE) is an important concern both for environmental issues and to preserve the material resources, with minimum energy consumption. Considering that polystyrene fraction was reported as approximate 80% of the total amount of WEEE plastic, this article aims to evaluate the recycling of this fraction, without separation by components, by melt compounding with styrene-butadiene block-copolymer (SBS) and hydrogenated and maleinized SBS, the blend of the two elastomers acting both as an impact modifier and compatibilizer. The composites are characterized by mechanical analysis, impact tests, dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy, energy dispersive X-ray analysis, and X-ray diffraction. The recycling conditions of the polystyrene fraction as composites without eliminating the WEEE additives for improved UV and flame resistance, with physical mechanical properties comparable to those of high-impact polystyrene resulted from the study. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48329.